|
Frame
The main frame is the foundation of any bagger and it is critical
that the frame stay rigid to keep the rotor running true. The Ag-Bag 6000
series frames are made out of heavy wall structural steel tubing and heavy
gauge flat plate throughout to create a solid foundation to an exceptional
bagger.
Rotor Design
The rotor and tunnel design are the key to a well packed bag. Ag-Bag started in 1978 and was the first company in the United States to
build bagging machines. Ag-Bag wrote the book on where the rotor
needed to be placed, how wide it had to be to for a given tunnel
size, how many teeth the rotor needed and where they had to be positioned.
Low rotor position provides consistent packing through the entire
bag.
Replaceable wear
strips on teeth
Conveyor(s)
- Split conveyors for
baggers with 7' rotors
- 30" wide conveyor
for high capacity
- Lower clean out door
for long life
- CA550 roller chain for
smooth operation and long life (top driven)
- Conveyor moves with
a cable and winch, hydraulic slide optional
Large hopper
for increased capacity
Self-Contained Hydraulic
System
The G6070 baggers are equipped with a self-contained hydraulic system
that runs off the dual output gear box.
The self-contained hydraulic system allows you to operate:
- The variable speed feed
conveyor from ground level
- Does not create heat
in the tractor hydraulic system and allows the use of older vintage
tractors with low volume hydraulics
- Operate the optional
variable speed cable rewind system
- Operate the optional
hydraulic conveyor slide system
Cable, Cable Drum
Brake(s) & Back Stop
The dual cable system allows you to make a well compacted bag with
ease. Large industrial disc brake(s) and a simple brake hand pump
and brake pressure gauge control the rate of cable release. Ag-Bag
bags have convenient “stretch gauges” continually along
the bag to insure consistency. The bag back stop is a heavy duty
steel frame webbed with rope to insure no damage to the bag. An
optional lightweight aluminum back stop is also available for the
G6070 baggers.
Drive System
- Double 120 roller chain
to drive the rotor
- Large planetary gear
box to drive the rotor on the G6070P model
- Heavy duty PTO shaft
with shear protection
- Power requirements on
the PB6000, G6060 & G6070 models only need a maximum of 120
HP!
- The horsepower requirements
on the G6070P planetary drive model is only a maximum of 120 HP
but can take up to 150 HP!
- Bag Boom & Bag Cradle.
All models are available with a bag boom and bag cradle.
- Makes installing the
Ag-Bag bag quick and easy
- Aids in installing different
tunnel sizes and/or tunnel extensions
- Can be used to place
the back stop onto the transport braces
Transport
- Transport lights, slow
moving vehicle sign and reflective tape are used to mark the bagger
for transport
- The G6070 can be narrowed
to an 8-1/2' transport width
Inoculant Package
To insure top quality feed Ag-Bag recommends the use of specially
formulated Ag-Bag Inoculants. Both liquid and granular inoculants
along with applicators are available to help insure top quality
feed.
The Feed Quality
Solution
Miller Ag-Bag® has pioneered the system and the solution for
creating high quality feed. It goes way beyond simply putting feed
in a bag. It means having the right machine, the right packing design,
along with the bags and inoculants designed to complete the process.
Tunnels & Tunnel
Extensions
- G6070 & G6070P baggers
can be ordered with interchangeable 9' or 10' tunnels
- Tunnel extensions increase
bag capacity by packing silage tighter. They also create a smoother
bag.
[^top] |
